ВОЗМОЖНОСТЬ ПОДКЛЮЧЕНИЯ К СЕТИ BLUETOOTH® АВТОМОБИЛЕЙ JAGUAR

Bluetooth® — это технология радиосвязи ближнего действия, позволяющая передавать речь и файлы по беспроводному соединению. Радиус действия Bluetooth® составляет приблизительно 10 метров, а скорость передачи данных — 1 Мбит/с.
JAGUAR BLUETOOTH COMPATIBLE PHONES

Bluetooth® позволяет удаленно подключать совместимый мобильный телефон к своему автомобилю Jaguar, чтобы совершать и принимать вызовы, а также пользоваться прочими основными функциями мобильного устройства. Подключение по Bluetooth® позволяет вам пользоваться возможностями мобильного телефона во время вождения или парковки, оставив тот в сумке или кармане. Для обеспечения еще большего комфорта и безопасности, мы предусмотрели возможность управления телефонами, подключенными по Bluetooth®, посредством голосовых команд, а также с помощью сенсорного экрана вашего Jaguar. Ассортимент функций зависит от модели мобильного телефона. Для получения дополнительной информации посетите наш центр подключения.
СОВМЕСТИМЫЕ С СЕТЬЮ BLUETOOTH® АВТОМОБИЛЕЙ JAGUAR МОБИЛЬНЫЕ ТЕЛЕФОНЫ

Возможность подключения к сети Bluetooth® автомобилей Jaguar поддерживает множество смартфонов, включая устройства брендов Apple, Samsung, Nokia, Sony и Blackberry. Наши инженеры проводили проверки устройств, чтобы обеспечить соответствие стандартам качества. Этот перечень будет обновляться по мере выхода и завершения испытания новых устройств. Обратите внимание, что не все телефоны с Bluetooth® поддерживают возможность подключения к сети Bluetooth® автомобилей Jaguar.
GO TO BLUETOOTH® CONNECTION PROCEDURES

Чтобы ознакомиться с обучающими руководствами по подключению мобильного устройства к автомобилю Jaguar по Bluetooth®, посетите наш специальный центр подключения.
ПЕРЕЙТИ К ПРОЦЕДУРАМ ПОДКЛЮЧЕНИЯ ПО BLUETOOTH®

You do not need specific software, just for the phone to have Bluetooth connectivity. To connect the phone, ensure Bluetooth is enabled, and the device is ‘visible’.

Both – the phone is tested and confirmed as compatible only with current software levels. Therefore, it is essential to check that your phone has the correct software.

No – Jaguar have only tested the models listed on our Connectivity Centre as compatible and can only recommend these as suitable handsets.

This defines the standard specifications agreed by the Bluetooth® Special Interest Group (SIG) who defined how Bluetooth® would work in the automotive sector. Early phones were not developed in line with the defined specification.

Yes – how this is done varies by phone manufacturer but guidelines will be provided on the Connectivity Centre website. Alternatively, you can contact your phone retailer or manufacturer to provide information for upgrading software.

The existing list of compatible phones covers current models that provide the level of vehicle functionality and integration required. Further phones will be approved and periodically added to the list.

It may work, or work partially. However Jaguar cannot guarantee the level of operation.

Yes, for a phone in the cradle and newer vehicle models (check compatibility lists).

This accessory system does not allow use of the vehicle touch screen or keypad, but does give voice interaction. This is a standalone accessory system.

It is usually located in the centre console between the front two seats under the armrest. Please check your vehicle handbook for more details.

Yes.

Yes.

12V in-car charging leads can be purchased from any phone store.

Yes – it can be located anywhere in the cabin. Whilst it may function from the boot, Jaguar do not recommend this, as the signal may be too weak.

The phone handset will show a "car" or "headset" symbol to indicate it is in handsfree profile. Also, when in phone mode, the audio head unit or touch screen will confirm a phone is correctly connected via the cradle. This screen will show the network operator name and signal strength if the phone is registered to the network. If a phone is not registered to the network, "No Network" will be shown. If a phone is not connected correctly to the cradle, the audio head unit or touch screen will display "Phone Not Fitted" in the phone screen as detailed in the vehicle handbook.

When in phone mode, the audio head unit or touch screen will display "Bluetooth" or a telephone handset symbol, as detailed in your vehicle handbook. Due to a limitation of Bluetooth®, the signal strength is not displayed on the vehicle display. Also, the phone handset will show a "car" or "headset" symbol to indicate it is in handsfree profile.

Yes – although if a phone that is switched off is connected to the Bluetooth®, it will automatically switch on.

Pairing instructions differ depending on your phone manufacturer and model. Specific instructions for your compatible phone can be found here.

Multiple phones can be paired, please refer to your specific vehicle handbook for further information. This list is in order of last connected phone, with the last connected phone at the top. Only one phone can be connected at any one time.

Yes. When a phone is connected to the cradle, the Bluetooth® connection will disconnect. The cradle connection has priority over the Bluetooth® connection.

Every time you come back to the car, it should automatically reconnect to the paired phone. However, this depends on the phone settings and handset compatibility. Please check the pairing and connection guide for details. The vehicle will automatically search for the last connected Bluetooth® phone when the ignition is switched on and no phone is attached to the cradle. If the last connected Bluetooth® phone is in range (and set to accept connections), the vehicle and phone will connect. If the last connected phone is not in range, the vehicle will search for the next phone on the device list.

No, pairing need only be done once, and then the phone can be connected/disconnected as frequently as the customer wishes. It is recommended that the customer keeps the phone battery charged at all times – some phones turn Bluetooth® off automatically when the phone battery gets low.